Important eventsBack
FM radio is demonstrated to the Federal Communications Commission for the first time5.1.1940
Throughout the world, the FM broadcast band falls within the VHF part of the radio spectrum. Usually 87.5 to 108.0 MHz is used, or some portion thereof, with few exceptions:
- In the former Soviet republics, and some former Eastern Bloc countries, the older 65–74 MHz band is also used. Assigned frequencies are at intervals of 30 kHz. This band, sometimes referred to as the OIRT band, is slowly being phased out in many countries. In those countries the 87.5–108.0 MHz band is referred to as the CCIR band.- In Japan, the band 76–90 MHz is used.
The frequency of an FM broadcast station (more strictly its assigned nominal centre frequency) is usually an exact multiple of 100 kHz. In most of the Americas and the Caribbean, only odd multiples are used. In some parts of Europe, Greenland and Africa, only even multiples are used. In Italy, multiples of 50 kHz are used. There are other unusual and obsolete standards in some countries, including 0.001, 0.01, 0.03, 0.074, 0.5, and 0.3 MHz. However, to minimise cross-channel interference, stations operating from the same or geographically close transmitters tend to keep to at least a 0.5 MHz frequency separation even when closer spacing is technically permitted, with closer tunings reserved for more distantly spaced transmitters as potentially interfering signals are already more attenuated and so have less effect on neighbouring frequencies.
ModulationFrequency modulation (FM) is a form of modulation which conveys information over a carrier wave by varying its frequency (contrast this with amplitude modulation, in which the amplitude of the carrier is varied while its frequency remains constant). In analog applications, the instantaneous frequency of the carrier is directly proportional to the instantaneous value of the input signal. This form of modulation is commonly used in the FM broadcast band.
